So I went through the Update wizard and update the powered Rear Tailgate module and now when I try and open it, it just beeps 5 times and won't open.
Has anyone any suggestions or how would I go about returning to the working version of the software?
Thanks
Alex
Boot won't open after Update Wizard
Модератор: DanMc85
-
- Сообщения: 4
- Зарегистрирован: 19 июл 2019, 14:39
-
- Сообщения: 4
- Зарегистрирован: 19 июл 2019, 14:39
Re: Boot won't open after Update Wizard
Just as an update...
I've managed to sort it. I manually stepped it back to the previous version.
If anyone else has the same issue give me a shout and I'll help if I can
I've managed to sort it. I manually stepped it back to the previous version.
If anyone else has the same issue give me a shout and I'll help if I can
-
- Сообщения: 4
- Зарегистрирован: 09 авг 2019, 22:13
Re: Boot won't open after Update Wizard
I have the same problem I did the RGTM update in Ford Escape 2017 and now I can't open the tailgate - I only get beeps
-
- Сообщения: 4
- Зарегистрирован: 19 июл 2019, 14:39
Re: Boot won't open after Update Wizard
It's a nightmare isn't it.
I downloaded the previous files, needed the three of them and then manually uploaded. That basically puts the previous software on which was working.
Are you aware what your previous software version was?
I downloaded the previous files, needed the three of them and then manually uploaded. That basically puts the previous software on which was working.
Are you aware what your previous software version was?
-
- Сообщения: 4
- Зарегистрирован: 09 авг 2019, 22:13
Re: Boot won't open after Update Wizard
I know the version that was before the update, only how to download it manually. Can you give me a hint
У вас нет необходимых прав для просмотра вложений в этом сообщении.
-
- Сообщения: 4
- Зарегистрирован: 19 июл 2019, 14:39
Re: Boot won't open after Update Wizard
So if you go to https://www.ucdsys.ru/calibration/
Enter GJ5T-14C121-AF and the four digit pin and press Download File.
I also downloaded the other two files, GJ5T-14C122-AF and CJ5T-14C433-AD plus the bootloader - CJ5T-14C124-AB
They all download as Zip files. Unzip them and I saved them to the UCDS Downloads folder on my hard drive.
Now if you go to UCDS and press the top left icon, VBF File Uploader. Add the boot file as SBL, then add the next three files as per your old list so should look like the attached.
Select your car model from the list, then press Detect SBL.
At the bottom press start programming and it should install the old files.
Hopefully that will help. Let me know how you get on.
Cheers
Alex
Enter GJ5T-14C121-AF and the four digit pin and press Download File.
I also downloaded the other two files, GJ5T-14C122-AF and CJ5T-14C433-AD plus the bootloader - CJ5T-14C124-AB
They all download as Zip files. Unzip them and I saved them to the UCDS Downloads folder on my hard drive.
Now if you go to UCDS and press the top left icon, VBF File Uploader. Add the boot file as SBL, then add the next three files as per your old list so should look like the attached.
Select your car model from the list, then press Detect SBL.
At the bottom press start programming and it should install the old files.
Hopefully that will help. Let me know how you get on.
Cheers
Alex
У вас нет необходимых прав для просмотра вложений в этом сообщении.
-
- Сообщения: 4
- Зарегистрирован: 09 авг 2019, 22:13
Re: Boot won't open after Update Wizard
Thank you for your fast answer. At the same time I wrote with UCDS programmers and they also gave a similar but simpler way using the help of which I restored the flap.
Here's a tip from UCDS
Файл опроса автоматически сохраняется в папке UCDS\Sessions
Открываете тот что самый ранний по дате в разделе Update Wizard
Выбирате RGTM
В столбце Update Level мышкой ставим тот же софт что и у вас.
Скачиваем файлы - прошиваем и все
Here's a tip from UCDS
Файл опроса автоматически сохраняется в папке UCDS\Sessions
Открываете тот что самый ранний по дате в разделе Update Wizard
Выбирате RGTM
В столбце Update Level мышкой ставим тот же софт что и у вас.
Скачиваем файлы - прошиваем и все