Hello, i can not write the new odometer melage to the IPC NX7T-10849-SXB.
Wen i read the IPC its ok than i kan show the orginal melage.
Wen i Write the new higher IPC melage , then write UCDS "Invalid Key"
thanks
Problem with write melage Ford Focus mk4 DigitalIPC NX7T-10849-SXB
Модератор: DanMc85
-
- Сообщения: 3
- Зарегистрирован: 04 июл 2021, 02:42
- kroligoff
- Сообщения: 1496
- Зарегистрирован: 16 янв 2013, 11:38
Re: Problem with write melage Ford Focus mk4 DigitalIPC NX7T-10849-SXB
Use Direct Configuration for write
-
- Сообщения: 3
- Зарегистрирован: 04 июл 2021, 02:42
Re: Problem with write melage Ford Focus mk4 DigitalIPC NX7T-10849-SXB
Thanks! sucess....
-
- Сообщения: 17
- Зарегистрирован: 02 сен 2019, 21:39
Re: Problem with write melage Ford Focus mk4 DigitalIPC NX7T-10849-SXB
Hi. I applied kuga digital ipc to my mk4 vehicle. I wrote the NX7T-10849-SXB ipc calibration files to the kuga ipc I installed, but the trim information did not work. If you have a NX7T-10849-SXB Focus mk4 digital ipc, can you read the configuration with ucds and save it and send it to me? tunademir@hotmail.com
-
- Сообщения: 1
- Зарегистрирован: 06 апр 2021, 01:46
Re: Problem with write melage Ford Focus mk4 DigitalIPC NX7T-10849-SXB
NX7T-10849-SXB SW Can you share it with me?tunademir45 писал(а): ↑29 июл 2021, 23:17Hi. I applied kuga digital ipc to my mk4 vehicle. I wrote the NX7T-10849-SXB ipc calibration files to the kuga ipc I installed, but the trim information did not work. If you have a NX7T-10849-SXB Focus mk4 digital ipc, can you read the configuration with ucds and save it and send it to me? tunademir@hotmail.com
304945505@qq.com
-
- Сообщения: 17
- Зарегистрирован: 02 сен 2019, 21:39
Re: Problem with write melage Ford Focus mk4 DigitalIPC NX7T-10849-SXB
I sent it to your e-mail addresslp304945505 писал(а): ↑08 окт 2021, 17:22NX7T-10849-SXB SW Can you share it with me?tunademir45 писал(а): ↑29 июл 2021, 23:17
Hi. I applied kuga digital ipc to my mk4 vehicle. I wrote the NX7T-10849-SXB ipc calibration files to the kuga ipc I installed, but the trim information did not work. If you have a NX7T-10849-SXB Focus mk4 digital ipc, can you read the configuration with ucds and save it and send it to me? tunademir@hotmail.com
304945505@qq.com