Hi
UPDATE the PSCM module, then the module is dead,the car can't move now.HELP!!!!!
I would need files to work!
PSCM: CV61-3C579-GA
VIN:LVSHJCAC5EE564041
Thanks
The PSCM is dead!HELP!!!!!!
Модератор: DanMc85
-
- Сообщения: 5
- Зарегистрирован: 10 мар 2018, 13:45
- DanMc85
- Сообщения: 104
- Зарегистрирован: 06 май 2016, 04:24
- Откуда: USA
- Контактная информация:
Re: The PSCM is dead!HELP!!!!!!
CV6T-14C386-AArabbit писал(а):Hi
UPDATE the PSCM module, then the module is dead,the car can't move now.HELP!!!!!
I would need files to work!
PSCM: CV61-3C579-GA
VIN:LVSHJCAC5EE564041
Thanks
CV6T-14C218-AK
CV6T-14C217-AH
Reflash these files with VBF Loader... you may have to mess with the flashing order... may have to mess with CAN bus setting... you need to add the SBL/bootloader file that was used from upgrade wizard.
Also you may have to use dead module mode and pull the power steering fuse (if you have one) and power steering module power connector from engine distribution box (if present) and plug them both back in at the same time after you hit start (most ford pscm's have two power sources)
But if this works you should be okay. If not,someone else might have more info. I am not that familiar with your vehicle.
-
- Сообщения: 5
- Зарегистрирован: 10 мар 2018, 13:45
Re: The PSCM is dead!HELP!!!!!!
DanMc85 писал(а):CV6T-14C386-AArabbit писал(а):Hi
UPDATE the PSCM module, then the module is dead,the car can't move now.HELP!!!!!
I would need files to work!
PSCM: CV61-3C579-GA
VIN:LVSHJCAC5EE564041
Thanks
CV6T-14C218-AK
CV6T-14C217-AH
Reflash these files with VBF Loader... you may have to mess with the flashing order... may have to mess with CAN bus setting... you need to add the SBL/bootloader file that was used from upgrade wizard.
Also you may have to use dead module mode and pull the power steering fuse (if you have one) and power steering module power connector from engine distribution box (if present) and plug them both back in at the same time after you hit start (most ford pscm's have two power sources)
But if this works you should be okay. If not,someone else might have more info. I am not that familiar with your vehicle.
Thanks a lot . I tried, but the pscm still can't work.T_T
-
- Сообщения: 5
- Зарегистрирован: 10 мар 2018, 13:45
Re: The PSCM is dead!HELP!!!!!!
Someone pls help me!!
-
- Сообщения: 5
- Зарегистрирован: 10 мар 2018, 13:45
Re: The PSCM is dead!HELP!!!!!!
<m module="PSCM">
<d DID="F108" Desc="ECU Network Signal Calibration Number" Data="CV6T-14C386-AA"/>
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-AV6C-3D070-AC"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="BV6T-14C262-AA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="CV61-3C579-GA"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="CV6T-14C218-AK"/>
<d DID="F162" Desc="Software Download Specification Version" Data="0x04"/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="CV6T-14C217-AH"/>
</m>
<d DID="F108" Desc="ECU Network Signal Calibration Number" Data="CV6T-14C386-AA"/>
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-AV6C-3D070-AC"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="BV6T-14C262-AA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="CV61-3C579-GA"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="CV6T-14C218-AK"/>
<d DID="F162" Desc="Software Download Specification Version" Data="0x04"/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="CV6T-14C217-AH"/>
</m>
-
- Сообщения: 5
- Зарегистрирован: 10 мар 2018, 13:45
Re: The PSCM is dead!HELP!!!!!!
Flash the pscm finished with no error.
730
<F108>CV6T-14C386-AA</F108>
<F111>BV6T-14C262-AA</F111>
<F113>CV61-3C579-GA</F113>
<F124>CV6T-14C218-AK</F124>
<F188>CV6T-14C217-AH</F188>
T-T pls help .
but the pscm module is not work .
The files seems all right.730
<F108>CV6T-14C386-AA</F108>
<F111>BV6T-14C262-AA</F111>
<F113>CV61-3C579-GA</F113>
<F124>CV6T-14C218-AK</F124>
<F188>CV6T-14C217-AH</F188>
T-T pls help .
У вас нет необходимых прав для просмотра вложений в этом сообщении.
-
- Сообщения: 340
- Зарегистрирован: 30 янв 2013, 01:44
- Откуда: Czech Republic
Re: The PSCM is dead!HELP!!!!!!
I have dead module PSCM in mondeo mk5 (cable was disconnected during fw update)
SBL: DG9C-14D005-AA
F188: F1GC-14D003-AA
F10A: FG9C-14D007-NE
------------------
F113: F1GC-3F964-AA
forced programming does not work (fuse F19 has been pulled out / connected before forced programming, I tried can-bus CAN_HS and HS2):
00:00:00:503: HW/SW part number: F1GC-3F964-AA
00:00:00:505: Loading and prepare database...
00:00:09:779: Searching for SEED keys...
00:00:11:756: SEED Keys found.
00:00:39:676: Forced programming mode is started... Wait answer...
00:00:54:683: Prog Request in FORCE MODE Failed!
Do you have any idea what next? Thanks
SBL: DG9C-14D005-AA
F188: F1GC-14D003-AA
F10A: FG9C-14D007-NE
------------------
F113: F1GC-3F964-AA
forced programming does not work (fuse F19 has been pulled out / connected before forced programming, I tried can-bus CAN_HS and HS2):
00:00:00:503: HW/SW part number: F1GC-3F964-AA
00:00:00:505: Loading and prepare database...
00:00:09:779: Searching for SEED keys...
00:00:11:756: SEED Keys found.
00:00:39:676: Forced programming mode is started... Wait answer...
00:00:54:683: Prog Request in FORCE MODE Failed!
Do you have any idea what next? Thanks
-
- Сообщения: 340
- Зарегистрирован: 30 янв 2013, 01:44
- Откуда: Czech Republic
Re: The PSCM is dead!HELP!!!!!!
I connect UCDS direct to HS2 (connector near interior mirror) and disconnect battery - only PSCM (F19) get 12V ... module still does not respond
-
- Сообщения: 121
- Зарегистрирован: 04 ноя 2017, 08:10
Re: The PSCM is dead!HELP!!!!!!
A resistor on the can bus was required to connect the module directly ...
-
- Сообщения: 340
- Зарегистрирован: 30 янв 2013, 01:44
- Откуда: Czech Republic
Re: The PSCM is dead!HELP!!!!!!
module is still in car, resistor is not needed (R=60Ohm between HS2+ and HS2-)
- DanMc85
- Сообщения: 104
- Зарегистрирован: 06 май 2016, 04:24
- Откуда: USA
- Контактная информация:
Re: The PSCM is dead!HELP!!!!!!
There are two PSCM fuses, one regular, and one large one. Disconnect them both and reconnect at same time when using dead modules mode.