Страница 1 из 2

Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 11 фев 2020, 17:26
santa_cisco@o2.pl
Hi,

I did update FCIM module by update wizard and after update FCIM have wrong part number other than before.
There is no DCT's but I've got SONY radio with sync2 and sound button stop working and i can't open my trunk, electric liftgate doesn't react on any button (on liftgate, on key, in cabin) just hazard lights flashes 2 times.

Is it possible to get back to oryginal part number and firmware?
How to do that?

Here are some information about update:

Update wizzad update FCIM from HS7T-14G121-ZA to HS7T-14G121-EA and after that update FCIM Part Number changed from GS7T-18E245-BCC to HS7T-18E245-P????...

I've tried to did update with new HS7T-14G121-EA by VBF loader but it does nothing update ended successfully but nothing happens.
Update with HS-CAN and HS2, with can sleep mode, even with died module programming where I put GS7T-18E245-BCC part number.
When I update with old HS7T-14G121-ZA Part number is still HS7T-18E245-P????... but current version change to this old one HS7T-14G121-ZA so update goes ok but sound button and liftgate still don't work.

SBL I used DS7T-14G123-AA.

After update pool Modules:

Module Name: FCIMNetwork: MS1 Protocol: GGDS
F10AECU Cal-Config Part NumberHS7T-14G126-EA
F110On-line Diagnostic Database Reference NumberDS-HS7T-18E245-AA
F111ECU Core Assembly NumberHS7T-14G127-P???????????
F113ECU Delivery Assembly NumberHS7T-18E245-P???????????
F124ECU Calibration Data #1 NumberHS7T-14G126-EA
F162Software Download Specification Version0x05
F163Diagnostic Specification Version0x03
F188Vehicle Manufacturer ECU Software NumberHS7T-14G121-EA
F18CECU Serial Number0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF0xFF

I din't do pool Modules before update.

Please help me!!

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 11 фев 2020, 19:10
janel
Just load your original software with the latest UCDS version: enter Update Wizard, select "Load from ETIS" and rewrite your original software.

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 11 фев 2020, 19:12
santa_cisco@o2.pl
It was my first action but without any luck.

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 28 ноя 2020, 21:46
bc529
Any news? i have a same problem :(

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 29 ноя 2020, 01:42
sev611
stupid question but have you trid ford master reset (battery off for 2 minutes) it works on new kuga after battry management module update some times liftgate stops to work and many has just one solution a new rgtm module but we had one where we tried every thing and it didt work so as a last thing we took all power from the car in a cup of coffe time and when every thing was on again it was working again and we hhad a happy customer
sev

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 15 дек 2020, 02:21
peterpro
All that have problems after programming FCIM, could even try to apply this guide:
https://wiki.ucdsys.ru/doku.php?id=mond ... cimproblem
Maybe help!
Cheers

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 17 дек 2020, 15:15
fordsmaxtcdi
after the upgrade, load the module original Direct configuration FCIM
"load from file" (your backup) or "load from AsBuilt ETIS"

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 05 янв 2021, 20:36
santa_cisco@o2.pl
Hi, I really don't have luck at all..
I tried reflash FCIM module with VBF loader and now my FCIM died and I don't know how to back it to life.

From the beginning:
In VBF loader I marked tick DeadModule entered F113 GS7T-18E245-BCC

SBL DS7T-14G123-AA
ECU SOFT GS7T-14G121-ZB
ECU CALIB GS7T-14G122-ZB
MS-CAN

When I did this for first time it hangs after flash erase and show flashing failed and FCIM stops to respond.

After that i was trying to do this again but now i'm getting "requesting protected mode" and it's hang on that.

Please help me how can i recover this module. What is the procedure of use deadmodule programming?
Przechwytywanie.JPG
Przechwytywanie2.JPG

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 07 янв 2021, 15:20
kroligoff
select sleep all modules! and HS2 Bus

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 07 янв 2021, 19:30
santa_cisco@o2.pl
kroligoff писал(а): 07 янв 2021, 15:20 select sleep all modules! and HS2 Bus
Still nothing :(
Przechwytywanie3.JPG
Przechwytywanie4.JPG
Przechwytywanie5.JPG

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 08 янв 2021, 00:17
fordsmaxtcdi
maybe it helps ;)
see also comments
https://www.drive2.ru/b/490096039160710133/
and
https://www.drive2.ru/l/489915444375847299/

mondeo mk5
GS7T-
HS7T-

s-max mk2 example

Module Name: FCIM Network: MS1 Protocol: GGDS
F10A ECU Cal-Config Part NumberNo response
F110 On-line Diagnostic Database Reference Number DS-GT4T-18E245-CE
F111 ECU Core Assembly Number EM2T-14G127-AEA
F113 ECU Delivery Assembly Number EM2T-18E245-AEL
F124 ECU Calibration Data #1 Number EM2T-14G122-NA
F162 Software Download Specification Version 0x05
F163 Diagnostic Specification Version 0x03
F188 Vehicle Manufacturer ECU Software Number EM2T-14G121-NA
F18C ECU Serial Number 0514-2237

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 08 янв 2021, 12:44
kroligoff
Input Forced Programmed and input F113 Part: like: EM2T-18E245-AEL

After need
https://wiki.ucdsys.ru/doku.php?id=mond ... cimproblem

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 08 янв 2021, 13:41
santa_cisco@o2.pl
kroligoff писал(а): 08 янв 2021, 12:44 Input Forced Programmed and input F113 Part: like: EM2T-18E245-AEL

After need
https://wiki.ucdsys.ru/doku.php?id=mond ... cimproblem
Sorry but I won't do that because this is not my FCIM panel.

EM2T-18E245-AEL FCIM looks like S-MAX panel not Mondeo MK5.

On my FCIM there are two stickers which says two different model ford sticker says GS7T-18E245-BCC and another one without ford logo says HS7T-18E245-BCA.

Now I'm looking for calibration files for GS7T-18E245-BCC FCIM module to try flash step by step every version to find best working.
Can anybody send me a list of calibration files that would be accurate for this module?

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 08 янв 2021, 14:04
santa_cisco@o2.pl
fordsmaxtcdi писал(а): 08 янв 2021, 00:17 maybe it helps ;)
see also comments
https://www.drive2.ru/b/490096039160710133/
and
https://www.drive2.ru/l/489915444375847299/

mondeo mk5
GS7T-
HS7T-

s-max mk2 example

Module Name: FCIM Network: MS1 Protocol: GGDS
F10A ECU Cal-Config Part NumberNo response
F110 On-line Diagnostic Database Reference Number DS-GT4T-18E245-CE
F111 ECU Core Assembly Number EM2T-14G127-AEA
F113 ECU Delivery Assembly Number EM2T-18E245-AEL
F124 ECU Calibration Data #1 Number EM2T-14G122-NA
F162 Software Download Specification Version 0x05
F163 Diagnostic Specification Version 0x03
F188 Vehicle Manufacturer ECU Software Number EM2T-14G121-NA
F18C ECU Serial Number 0514-2237
At the beginning thank You very much for last night remote flashing session by teamviewer.

I findout that the problem causing flashing error is not FCIM module or calibration files but whole procedure from starting UCDS program to flashing VBF to FCIM module.
In my opinion someting is not right with this version of UCDS because flashing VBF on older version goes very ease and without any problems.

I went throught steps above and flashing proces ends with success.

If flashing process ends with error then close VBF file loader read dtc codes and clear all dtcs after that You must turn off AC then shutdown UCDS program, run it again, turn on AC, go to VBF file loader and flash module.
After that procedure flashing ends with success and my FCIM starts working.

I flashed files:
BL: DS7T-14G123-AA
GS7T-14G121-ZB
GS7T-14G122-ZB

Without forced programming
With sleep all modules
With MS-CAN

FCIM works but this is not the 100% sollution because I'm still having problems with It my panel have butto named SOUND and buttow heated windshield at this moment SOUND button don't do anything and windshild button acts like MAX AC.
My module still have funny part number(F113) like this: GS7T-18E245-P??????
I tried change this options in direct config but when I hit write to module I'm getting one error and nothing is stored to module.
Maby It's problem whit that I didn't flash properly calibrations files.
So maby anyone can help me to find proper files?

Re: Mondeo mk5 FCIM after wizard update wrong part number

Добавлено: 08 янв 2021, 18:30
santa_cisco@o2.pl
Ok, Guys I've got full solution for this whole problem with FCIM update and doesn't working SOUND and HEATED WINDSHIELD buttons.

My FCIM is SONY GS7T-18E245-BCC / HS7T-18E-245-BCA both are correct and this is the same module.

VBF files should be like this:

SBL: DS7T-14G123-AA
1: HS7T-14G121-ZA
2: HS7T-14G122-ZA

CAN-BUS should be CAN_MS

Flash by VBF files loader with parameters:

Enable "Sleep all modules" mode,
ECU reset after programming
Enable "Tester Present" service

Model of car "Mondeo (Euro) [CD391] - 2015>

After flash read and delete all DTC's

Next go to Direct config of FCIM and upload config from this file:
fcim_direct_config_.xml
Write to module.

After that still in direct config of FCIM download from ETIS asbuild and write it to FCIM too.

At the end You should review direct config of FCIM by Yourself to check if everything is correct enabled like Heated Drivers Wheel or others.

After that reset FCIM module or all modules and clear all DTC's.

Now You've got working correctly all buttons again.