IPMA

[mirol1205]

Who can't help me , Ipma update ewrtime I have failed to programming flash!! Error: General programming Failure x72

[kroligoff]

READ WIKI!!!

https://wiki.ucdsys.ru/doku.php?id=mond ... flashorder

[mirol1205]

Not work , mayby hard reset bad how ??

[mirol1205]

Not work , mayby hard reset bad how ?? , Kamara can't not write, and assist not work , 1 UPDATE what work this program ist drin , inside , bad not working

don't know how pictures here can't

[kroligoff]

Read AGAIN: viewtopic.php?f=11&t=2150&p=19025&hilit=IPMA#p19025
Use HS2 BUS!
Use search on forum

[mirol1205]

No working

[larsmdk]

Post pic on how you try to update

[mirol1205]

How I can't picture herr

[larsmdk]

It is possible

[mirol1205]

Tried dys too and networking ,VBF-loader:

1. SBL DA5T-14G021-BA
+DS7T-14G019-EM
+DS7T-14G024-EJ

2. SBL DA5T-14G021-BA
+HS7T-14G082-EB

3. SBL DA5T-14G021-BA
+HS7T-14G081- EB

Files 19 and 24 going,, files 82 and 81 error everytime , a tried everything , in Forscan this same problem , what those mind error 0x72 , please contact with me mirol1205@gmail.com
I tried calibrating, and write not correctly IPMAee

20200602_170150.jpg

20200604_064924.jpg

[larsmdk]

will say that it needs to be 81 first then 82

Via VBF Loader,
Flash 019 and 024, from the DTC tab, right-click on IPMA and reboot the module,
Via VBF Loader, flash 081, from the DTC tab, reboot ALL modules
Restart the IPMA module separately and clear the errors
Via VBF Loader, flash 082

[mirol1205]

will say that it needs to be 81 first then 82

Via VBF Loader,
Flash 019 and 024, from the DTC tab, right-click on IPMA and reboot the module,
Via VBF Loader, flash 081, from the DTC tab, reboot ALL modules
Restart the IPMA module separately and clear the errors
Via VBF Loader, flash 082

I tried and no working , I tried to calibre Kamara and I have written not correct calibration IPMA , THIS PROBLEM IST WITH IPMA , NOT WHIT LOADERS

[larsmdk]

Try to use this vin to update ipma, and it will maybe fail the last file, but then do that with vbf loader for the last, then all is good
WF0EXXWPCEJL51336
i had also error x72

[fordsmaxtcdi]

Try to use this vin to update ipma, and it will maybe fail the last file, but then do that with vbf loader for the last, then all is good
WF0EXXWPCEJL51336
i had also error x72

car configuration may be different

mirror without pre collision
mirror with pre collision

[mirol1205]

20200605_195356.jpg

20200605_194135.jpg

Try to use this vin to update ipma, and it will maybe fail the last file, but then do that with vbf loader for the last, then all is good
WF0EXXWPCEJL51336
i had also error x72

car configuration may be different

mirror without pre collision
mirror with pre collision

link on this - serial number