Hi!
I've updated IPMA using Update Wizard, programming ends with message: Programming Failed.
Now the module is dead.
I can't flash it using VBF Loader even if I chceck "Dead module mode" module does not respond.
In menu "Mondeo V" when I poll all modules, IPMA gives only Hardware Number. IPMA not respond when I read DTC's.
I can flash it using update wizard when I read the list of modules from ETIS, but it doesn't repair the module.
Does anyone have an idea how to repair this module?
Mondeo V IPMA Dead after update
Модератор: DanMc85
-
- Сообщения: 2
- Зарегистрирован: 27 фев 2018, 14:43
-
- Сообщения: 5
- Зарегистрирован: 23 фев 2020, 12:30
Re: Mondeo V IPMA Dead after update
The order of the files is important.
I think the order of 2 files should be reversed, File 2 and 3?
https://www.facebook.com/groups/5081678 ... 729034107/
I think the order of 2 files should be reversed, File 2 and 3?
https://www.facebook.com/groups/5081678 ... 729034107/
- fordsmaxtcdi
- Сообщения: 127
- Зарегистрирован: 11 апр 2020, 21:33
Re: Mondeo V IPMA Dead after update
We used Teamviewer
I think we got it working
if IPMA error code C1001 is present, the camera needs to be calibrated
instruction:
http://www.2gfusions.net/showthread.php ... light=IPMA
Step 10
Step 11
Step 12
Step 13
or UCDS
the car must be ready for driving
I think we got it working
if IPMA error code C1001 is present, the camera needs to be calibrated
instruction:
http://www.2gfusions.net/showthread.php ... light=IPMA
Step 10
Step 11
Step 12
Step 13
or UCDS
the car must be ready for driving
У вас нет необходимых прав для просмотра вложений в этом сообщении.
-
- Сообщения: 2
- Зарегистрирован: 27 фев 2018, 14:43
Re: Mondeo V IPMA Dead after update
@fordsmaxtcdi Helps with Team Viewer.
Big Thanks for Your help.
Big Thanks for Your help.