Страница 1 из 1

Focus RS 2016 IPC Drive Modes

Добавлено: 25 фев 2019, 23:45
lotushiast
Hello,

after a modul reset i lost the Drive Modes on my car.
Updated the IPC with no luck, going back to the old version also no luck.
Then i tried to read the IPC Modul in level 1, 3 and HEV in Direct Configuration, but it was possible because Seed not found.
Tried to sent from AS Built file but got the message invalid Key (0x35).
please have a look at the screenshot of the IPC and tell if possible whats wrong.

Thanks Harry.

Re: Focus RS 2016 IPC Drive Modes

Добавлено: 08 авг 2019, 01:41
jimbojambojumbo
HEV is hybrid electric vehicle you shouldn't try and flash this to non hybrid car
Before updating IPC read module and make backup then after updating IPC you have to send file back to IPC this is also the same for any module you update
I too lost drive modes after updating BCM and IPC and got them back by resending config to each

Re: Focus RS 2016 IPC Drive Modes

Добавлено: 03 дек 2019, 23:23
Benny B.
Hi. How did you get the drive modes back?

I'm from Germany my english is not the best. That's why I do not understand what to do.

Would be very happy if you help me ...

Best regards Benny

Re: Focus RS 2016 IPC Drive Modes

Добавлено: 04 дек 2019, 00:24
jimbojambojumbo
Benny B. писал(а):Hi. How did you get the drive modes back?

I'm from Germany my english is not the best. That's why I do not understand what to do.

Would be very happy if you help me ...

Best regards Benny

Direct config to IPC then select load from Asbuilt Etis enter vin number and download and write to module
if this does not work do the same for BCM also

Re: Focus RS 2016 IPC Drive Modes

Добавлено: 04 дек 2019, 14:51
Benny B.
Thank you very much. It works. Only with the IPC.

Thanks. I'm happy now