HVAC Blinking after update

Big car family

Модератор: DanMc85

Ответить
jimjamyaha
Сообщения: 5
Зарегистрирован: 25 окт 2018, 22:12

HVAC Blinking after update

Сообщение jimjamyaha »

Hi All,

Have used UCDS to update wizard the BCM, PCM and IPC successfully on a 2006 S-Max Petrol. The HVAC wouldn't do it via the wizard so

Tried to update the HVAC using the VBF loader and now all it does is flash all the lights and not turn on.

I've tried:
  • Flashing an earlier calibration
  • Disconnecting -ve battery to reset
  • Opening up and disconnecting the connectors to reset
The HVAC is not coming up on the CAN bus, but is still flashable ok by the VBF loader.

6M2T-18D619-AE was the original calibration - does anyone have access to this file?

I have 6M2T-18D619-AF.vbf and 6M2T-18D619-AG.vbf as well as the later 7S7T-18D619-AD.vbf and 7S7T-18D619-AH.vbf but all of these whilst programmed do not resolve the issue.

Is there anything else I should have done when using the VBF loader or in terms of reset procedures? Further info on attached pictures.

Thank you in advance.
initial_scan_result_for_software_updatesCapture.PNG
before.PNG
after.PNG
У вас нет необходимых прав для просмотра вложений в этом сообщении.

Artist
Сообщения: 121
Зарегистрирован: 04 ноя 2017, 08:10

Re: HVAC Blinking after update

Сообщение Artist »

Try updating the module to clear the module error and reset the module.
Then try to turn it on.
Or update it via the update via vbf loader.

jimjamyaha
Сообщения: 5
Зарегистрирован: 25 окт 2018, 22:12

Re: HVAC Blinking after update

Сообщение jimjamyaha »

Hi,

So this morning tried again - and realised I might need another calibration file.

So flashed 6M2T-18D619-AF.vbf and 6M2T-18D620-AF.vbf which all programmed ok - but no change after the completion.

Also tried the latest 7S7T-18D619-AH.vbf and 7S7T-18D620-AH.vbf which loaded fine but nothing turned on.


Original data from the module (pre-update)

Module Name: HVAC Network: MS-CAN Protocol: GGDS
F113 - ECU Delivery Assembly Number : 6M2T-18C612-AF
F124 - ECU Calibration Data #1 Number : 6M2T-18D620-AE
F162 - Software Download Specification Versi`on : 0x03
F163 - Diagnostic Specification Version : 0x02
F188 - Vehicle Manufacturer ECU Software Number : 6M2T-18D619-AE
F191 - Vehicle Manufacturer ECU Hardware Number : 6M2T-14C239-AF
F18C - ECU Serial Number : WWYA06159

Dutchguy
Сообщения: 32
Зарегистрирован: 15 ноя 2013, 14:16

Re: HVAC Blinking after update

Сообщение Dutchguy »

You need to program:

7S7T-18D619-AH and 7S7T-18D620-AH

done several modules without problems , both with display and NX integrated (both use the same software)

jimjamyaha
Сообщения: 5
Зарегистрирован: 25 окт 2018, 22:12

Re: HVAC Blinking after update

Сообщение jimjamyaha »

Thanks - have def used the files you mentioned - but something has bricked the module I think - as it still no change :(
Dutchguy писал(а):You need to program:

7S7T-18D619-AH and 7S7T-18D620-AH

done several modules without problems , both with display and NX integrated (both use the same software)

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: HVAC Blinking after update

Сообщение kroligoff »

Use VBF Loader
Need Select 2 files+SBL
#1
6M2T-18D619-AG

#2
6M2T-18D620-AG

SBL:
6M2T-18D618-AC

Ответить