2010 Convers+ into a 2008 car

Big car family

Модератор: DanMc85

Ответить
janel
Сообщения: 47
Зарегистрирован: 02 авг 2015, 16:30

2010 Convers+ into a 2008 car

Сообщение janel »

Hi,
I have a 2010MY Convers+ IPC (AM2T-10849-XC) and I want to install it on an older car (2008MY). This does not work as the airbag light is permanently on.
As for now, the m0tral conversion is not possible, and I saw that conversmod.de are offering an alternative.
Can anyone help me with some advice on how can I achieve this?
Thanks!

Artist
Сообщения: 121
Зарегистрирован: 04 ноя 2017, 08:10

Re: 2010 Convers+ into a 2008 car

Сообщение Artist »

You have to buy a credit and choose the option for older cars !!!
Well, you can also consider other additional features, digital speed, or shutting open door annoying ...
У вас нет необходимых прав для просмотра вложений в этом сообщении.

janel
Сообщения: 47
Зарегистрирован: 02 авг 2015, 16:30

Re: 2010 Convers+ into a 2008 car

Сообщение janel »

This option is only for facelift modules (2011MY, BS7T-10849) as far as I know, not for 2010MY...

Artist
Сообщения: 121
Зарегистрирован: 04 ноя 2017, 08:10

Re: 2010 Convers+ into a 2008 car

Сообщение Artist »

Yes, you're right. I did not notice what Convers + you have. The picture shows which type is ...

In your case, if the airbag lights up, you need to upload the latest firmware. (1007 for predfacelift and 1122 center facelift)
You will find this according to the rom version in the test mode.
After writing, erase all IPC errors. Reset the IPC module.
Then write the configuration from the BCM to the IPC for the car that will use the convers +.
There will be no other problem ...

Ответить