hi everyone
how to reset mileage for mondeo 5 Hybrid?
I use ucds to read ipc, but the message field shows "diagnostic request done. Seed not coorect!" and no change.
thanks~
ps. software version 2.0.002.002
firmware version 8.00
hardware version 3.00
how to reset mileage for mondeo 5 Hybrid
Модератор: DanMc85
-
- Сообщения: 1
- Зарегистрирован: 22 июл 2014, 17:22
- Darkleo
- Сообщения: 458
- Зарегистрирован: 18 янв 2013, 00:45
- Откуда: Санкт-Петербург
Re: how to reset mileage for mondeo 5 Hybrid
Hi
Its not available. Our market dont have this type of car. So we cant found IPC in our hands to develop reset mileage on this type of IPC for Mondeo 5
Greets
Its not available. Our market dont have this type of car. So we cant found IPC in our hands to develop reset mileage on this type of IPC for Mondeo 5
Greets
- DanMc85
- Сообщения: 104
- Зарегистрирован: 06 май 2016, 04:24
- Откуда: USA
- Контактная информация:
Re: how to reset mileage for mondeo 5 Hybrid
You can reprogram it manually using an EEPROM programmer on the S93C86 chip, if you are comfortable with that sort of thing.
-
- Сообщения: 19
- Зарегистрирован: 15 авг 2017, 03:16
- Откуда: Brazil
- Контактная информация:
Re: how to reset mileage for mondeo 5 Hybrid
I messed around my IPC for Hybrid. I chose to enable Odometer delta and it increased about 4000 km in my odometer.
So it might exist a light at the end of the tunnel.
Maybe for next version.
So it might exist a light at the end of the tunnel.
Maybe for next version.
-
- Сообщения: 4
- Зарегистрирован: 19 мар 2017, 03:50
Re: how to reset mileage for mondeo 5 Hybrid
Hello,
You can used this:
https://www.ebay.es/itm/SOIC8-SOP8-Flas ... SwCQlZ8JzF
and software edit / programmer for the e2prom
regards !!!
You can used this:
https://www.ebay.es/itm/SOIC8-SOP8-Flas ... SwCQlZ8JzF
and software edit / programmer for the e2prom
regards !!!