Ford Ranger BCM

Resolving problems with software and hardware

Модератор: DanMc85

Ответить
Artos1974
Сообщения: 27
Зарегистрирован: 14 май 2016, 22:55

Ford Ranger BCM

Сообщение Artos1974 »

Need help!!!

I need the VBF files for the BCM !!!
Have 2 DTC I can not delete!

BdyCM U2100:00-8A
BdyCM U2101:00-0A


Ask for your help

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: Ford Ranger VIN 6FPPXXMJ2P

Сообщение kroligoff »

SBL:DG9T-14C187-AB
#1:HU5T-14C184-AAN
#2:EB3T-14C636-AAA
#3:EB3T-14F389-CA
#4:EB3T-14F390-BAB
#5:EB3T-14G163-AAA
#6:HU5T-14F391-AAA
#7:HU5T-14G162-CAC

Try load direct config to BCM from etis

Artos1974
Сообщения: 27
Зарегистрирован: 14 май 2016, 22:55

Re: Ford Ranger BCM

Сообщение Artos1974 »

Thanks for the files!
Did it with the VBF Loader ind wrote the modules, have used HS1 for it! Have then recorded the direct config of ETIS ..
I programmed the TPMS sensors with the teach-in unit.
The 2 errors are still there and can not be deleted.
and the interior lighting continues to flash!

zrachwal84
Сообщения: 27
Зарегистрирован: 20 сен 2017, 08:52

Re: Ford Ranger BCM

Сообщение zrachwal84 »

I got the same problem in Mustang

Very strange problem

saeb
Сообщения: 4
Зарегистрирован: 29 янв 2017, 11:42

Re: Ford Ranger BCM

Сообщение saeb »

Hate to say it but there is one change you have made to the asbuilt in the past that has brought on these faults.

Only way I know of at this stage is the replace the BCM. No amount of flashing, re doing PATS etc. removes the fault.

Spent numerous days and hours with UCDS, local Ford dealer using their security access etc which still did not resolve the issue.

When did the issue appear and what changes did you make to bring it on?

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: Ford Ranger BCM

Сообщение kroligoff »

Please open in Data Logger BCM,
Read EE04 Control Module Configuration Fault
and provide information about

saeb
Сообщения: 4
Зарегистрирован: 29 янв 2017, 11:42

Re: Ford Ranger BCM

Сообщение saeb »

EE04 for my old BCM I have on the bench is Zero.

Most of the faults that the above user has experienced are from changing DE15 "slaveexist SCL Cfg" from disable to enable. Once enabled it cannot be disabled again and will give the configuration error and flashing interior light.

_pucek112
Сообщения: 1
Зарегистрирован: 31 мар 2018, 21:45

Re: Ford Ranger BCM

Сообщение _pucek112 »

saeb писал(а):EE04 for my old BCM I have on the bench is Zero.

Most of the faults that the above user has experienced are from changing DE15 "slaveexist SCL Cfg" from disable to enable. Once enabled it cannot be disabled again and will give the configuration error and flashing interior light.
Hi
Do you know the SCL Cfg slaveexist repair procedurę. How to disable??

Tomi1
Сообщения: 1
Зарегистрирован: 28 янв 2018, 21:06

Re: Ford Ranger BCM

Сообщение Tomi1 »

Hello

has anyone found a solution to this problem?

Ranger2016
Сообщения: 10
Зарегистрирован: 09 дек 2017, 01:07

Re: Ford Ranger BCM

Сообщение Ranger2016 »

saeb писал(а):EE04 for my old BCM I have on the bench is Zero.

Most of the faults that the above user has experienced are from changing DE15 "slaveexist SCL Cfg" from disable to enable. Once enabled it cannot be disabled again and will give the configuration error and flashing interior light.
How do you bench it ?

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: Ford Ranger BCM

Сообщение kroligoff »

Need reset BCM to Manufacture mode, please contact with telegram @xJustHunteRx for do it

maniutek
Сообщения: 17
Зарегистрирован: 07 дек 2019, 21:07

Re: Ford Ranger BCM

Сообщение maniutek »

Hey
Has anyone found a solution to this problem?

Ranger2016
Сообщения: 10
Зарегистрирован: 09 дек 2017, 01:07

Re: Ford Ranger BCM

Сообщение Ranger2016 »

you have to remove the bcm and factory reset it on the table. there are few people who can do that. But it works

Ответить