Hello,need help!
I connect PCM module from another used car and with IDS program reprogramming VIN code and ignition key,
Engine crank but no start.I scaning all module with UCDS and Forscan does not show any errors.
When I do the test PCM with Forscan I get two errors
PCM P1116-00-Engine Coolant Temperature Sensor Out Of Self Test Range
PCM P1711-00-Transmission Fluid Temperature Sensor Out Of Self Test Range
Where's the problem? Maybe not compatible PCM module?
My orginal dead PCM module 2015 Escape Titanium 1.6L AT 2WD
P/N FJ5A-12A650-DC
H/W FJ5A-12B684-BA
PCM module from used car 2014 Escape SE 1.6L AT 2WD
P/N EJ5A-12A650-TB
H/W CV6A-12B684-CA
2015 Escape 1.6L AT 2WD PCM dead module
Модератор: DanMc85
-
- Сообщения: 4
- Зарегистрирован: 10 апр 2018, 17:31
2015 Escape 1.6L AT 2WD PCM dead module
У вас нет необходимых прав для просмотра вложений в этом сообщении.
- kroligoff
- Сообщения: 1496
- Зарегистрирован: 16 янв 2013, 11:38
Re: 2015 Escape 1.6L AT 2WD PCM dead module
Other year Escape have different sensors. Need flash firmware use you year sensors.
Use VBF Loader Load:
SBL: DL3A-14C273-AC
FJ5A-14C204-DD
Use VBF Loader Load:
SBL: DL3A-14C273-AC
FJ5A-14C204-DD
-
- Сообщения: 4
- Зарегистрирован: 10 апр 2018, 17:31
Re: 2015 Escape 1.6L AT 2WD PCM dead module
Today i flashing this firmware as you said FJ5A-14C204-DD But when I do the test PCM with Forscan I get now four errors.
Nothing changes
When push the START button ,engine crank and the starting sound comes,engine speed rises to 600 rpm and nothing more.
I bought this used PCM from ebay and don't know what to do next, maybe PCM its ok,but hardware types are not the same and incompatible for my car?
Спасибо за ответ,я понимаю по русски, можешь писать по русски!
Nothing changes
When push the START button ,engine crank and the starting sound comes,engine speed rises to 600 rpm and nothing more.
I bought this used PCM from ebay and don't know what to do next, maybe PCM its ok,but hardware types are not the same and incompatible for my car?
Спасибо за ответ,я понимаю по русски, можешь писать по русски!
У вас нет необходимых прав для просмотра вложений в этом сообщении.
- kroligoff
- Сообщения: 1496
- Зарегистрирован: 16 янв 2013, 11:38
Re: 2015 Escape 1.6L AT 2WD PCM dead module
Очень странно, хотя бы по температуре должно уйти, возможно в проводке дело?
-
- Сообщения: 4
- Зарегистрирован: 10 апр 2018, 17:31
Re: 2015 Escape 1.6L AT 2WD PCM dead module
I think so too problem in engine wire harness,i see in the schematic S123 splitter maybe don't have good contact.
S123 splitter direct connecting to Engine Coolant Temperature Sensor,Transmission Fluid Temperature Sensor and MAP Pressure Sensor?
I'll check tomorrow engine wire harness S123 splitter and I will report result.
Спасибо за помощь!
.
S123 splitter direct connecting to Engine Coolant Temperature Sensor,Transmission Fluid Temperature Sensor and MAP Pressure Sensor?
I'll check tomorrow engine wire harness S123 splitter and I will report result.
Спасибо за помощь!
.
У вас нет необходимых прав для просмотра вложений в этом сообщении.
-
- Сообщения: 4
- Зарегистрирован: 10 апр 2018, 17:31
Re: 2015 Escape 1.6L AT 2WD PCM dead module
Hello!
I spent a lot of time repairing this car.
I don't know why this happened, what could have killed a lot of parts ??? Maybe the effects of lightning with thunder? (последствия молнии)
I replaced total 10 units broken parts!
Broken parts:
1 PCM
2 Ignition Coils 4 units
3 Cranshaft sensor
4 Camshaft sensors 2 units
5 Fuel Rail sensor
6 MAP sensor
Now the car engine start and driving and do not have any errors!
Спасибо за помощь!
I spent a lot of time repairing this car.
I don't know why this happened, what could have killed a lot of parts ??? Maybe the effects of lightning with thunder? (последствия молнии)
I replaced total 10 units broken parts!
Broken parts:
1 PCM
2 Ignition Coils 4 units
3 Cranshaft sensor
4 Camshaft sensors 2 units
5 Fuel Rail sensor
6 MAP sensor
Now the car engine start and driving and do not have any errors!
Спасибо за помощь!
-
- Сообщения: 74
- Зарегистрирован: 06 ноя 2016, 20:54
- Откуда: Copenhagen
Re: 2015 Escape 1.6L AT 2WD PCM dead module
try to look at your generator it migth be the problem if it pulls out 18-19volt it will kill parts in random