Darkleo писал(а):Thanks for your help with logs from IDS
You're welcome... They were easy enough to capture.
Just used an OBD Y-Cable going to the GWM. UCDS one side and IDS on the other. Then used IDS to flash with UCDS CanBusLogger HS-CAN and MS-CAN set to 500 Kbps (MS-CAN 125Kbps errored IDS during programming).
I have Ford Fusion 2013 USA IPC DS7T-10849-EJ updated the software through the update wizard - the firmware process is a successful bug box, but the instrument no longer works - a completely black screen.
Through the update wizard through the service mode, the instrument unit can be sewn - but the result is the same.. (pull up update DS7T-14C026-CJ and DST-14C088-CF)
Read many forums and came to the conclusion that through VBF Loader combining the correct files should rise (you need to change the order of firmware files) - but the problem is that everything fails to run firmware through VBF Loader - I tried both on an established car and not with different ticks - in any case - perhaps the most recent version of UCDS has a bug in this mode with these blocks (I do not approve) - just read the reviews that there was already such\then updated the software and order...
Please help with advice or recommendation on how to revive the instrument
perhaps you need to play with the type of can bus when firmware loader - already when I wrote this message I looked in the software this option (access to the car will be in a day)
cultos писал(а): ↑28 июл 2020, 22:43
I have Ford Fusion 2013 USA IPC DS7T-10849-EJ updated the software through the update wizard - the firmware process is a successful bug box, but the instrument no longer works - a completely black screen.
Through the update wizard through the service mode, the instrument unit can be sewn - but the result is the same.. (pull up update DS7T-14C026-CJ and DST-14C088-CF)
Read many forums and came to the conclusion that through VBF Loader combining the correct files should rise (you need to change the order of firmware files) - but the problem is that everything fails to run firmware through VBF Loader - I tried both on an established car and not with different ticks - in any case - perhaps the most recent version of UCDS has a bug in this mode with these blocks (I do not approve) - just read the reviews that there was already such\then updated the software and order...
Please help with advice or recommendation on how to revive the instrument
perhaps you need to play with the type of can bus when firmware loader - already when I wrote this message I looked in the software this option (access to the car will be in a day)
what were your original files you have a backup as build no and configuration
cultos писал(а): ↑30 июл 2020, 21:01
Solved / change firmware files : first / second to flash via loader
I also had a problem with this IPC. I broke even two of them. Can you better describe how to solve the problem ??? Is it about changing the file in one and two places ???
cultos писал(а): ↑30 июл 2020, 21:01
Solved / change firmware files : first / second to flash via loader
I also had a problem with this IPC. I broke even two of them. Can you better describe how to solve the problem ??? Is it about changing the file in one and two places ???
in mid level IPC, update wizard has a bug and load files in wrong order.
load manualy in vfb loader:
1. 14C025 (bootloader)
2. 14C088
3. 14C026