Dead BCM

[Marihooan]

Hey.
After the upgrade, BCM died. I did ucds. Now I can not find SBL for this module and calibration files. Can someone help you? This is the Fusion 2015
Diagnostic Database Reference NumberDS-FL3T-14B476-AG
F111ECU Core Assembly NumberFU5T-14F141-CAC
F113ECU Delivery Assembly NumberFU5T-14B476-CAK
F162Software Download Specification VersionNo response
F163Diagnostic Specification Version0x03
F16BECU Cal-Config #2 Part NumberFU5T-14F391-AAA
F16CECU Cal-Config #3 Part NumberFG9T-14F390-BC
F16DECU Cal-Config #4 Part NumberFG9T-14F389-AA
F16EECU Cal-Config #5 Part NumberFG9T-14G163-AA
F17DECU Cal-Config #6 Part NumberFG9T-14G162-JB
F188Vehicle Manufacturer ECU Software NumberFU5T-14C184-AAH
F18CECU Serial Number15034003759

VIN: 3FA6P0HD8GR269411

Need number calibration file

[fordsmaxtcdi]

this is your first poll module

[dragunov]

It seems...

Very dangerous as starter to update BMC and PCM and such.

I only did an update to my IPC and such...

[Marihooan]

this situation I have first time. After bcm dead I restore him from VBF Loader but I do not have calibration file from this car. I take calibration file from another car. And now car start and drive but have only PCM, BCM, APIM and PAWN in diagnostic. No trouble code in BCM or PCM but on IPC have warning lamp ABS, ESP.

[fordsmaxtcdi]

VIN: 3FA6P0HD8GR269411
BCM
restore with VBF Loader

SBL: DG9T-14C187-AB
#1: FU5T-14C184-AAH
#2: FG9T-14C636-BC
#3: FU5T-14F391-AAA
#4: FG9T-14F390-BC
#5: FG9T-14F389-AA
#6: FG9T-14G163-AA
#7: FG9T-14G162-JB

https://www.fordtechservice.dealerconne ... roduct=IDS

[Marihooan]

VIN: 3FA6P0HD8GR269411
BCM
restore with VBF Loader

SBL: DG9T-14C187-AB
#1: FU5T-14C184-AAH
#2: FG9T-14C636-BC
#3: FU5T-14F391-AAA
#4: FG9T-14F390-BC
#5: FG9T-14F389-AA
#6: FG9T-14G163-AA
#7: FG9T-14G162-JB

https://www.fordtechservice.dealerconne ... roduct=IDS

Thank you, tomorow I tried and give you now!

[fordsmaxtcdi]

VIN: 3FA6P0HD8GR269411
BCM

Direct_BCM_300421_.xml

1.png

caution! do not change

2.png

good luck

[Marihooan]

I have no idea what I doing wrong. After VBF programming and direct configuration I have the same problem? the car is starts and drive but have only 4 position on diagnostic and warning lamp on dashboard ABS,ESP/

[Marihooan]

This is file with dtc. and picture after direct configuration.

[Marihooan]

The problem is solved. Thank you to everyone who responded.
The problem was in the wiring from the OBD to the BCM. As it turned out, the car is composed of different blocks of another car. Due to the fact that I did not see the ABS, I could not read the VIN from it. VIN in abs is from another car, that I have warning lamp in dashboard. Many thanks fordsmaxtcdi !