Ford S-MAX 2010 2.0 EB EcoBoost TCM MPS6 need firmware / calibration.

[zygus2]

Hi, hello.
I have ford smax 2010 2.0 ecoboost petrol with missing TCM
I found another mondeo with 2.0 ecoboost and AG9R-7J104-KB firmware, i download it via UCDS and write with VBF loader, but after wtiting TCM is death.
I repair it via bench flashing with FLEX, but i can't write this firmware.
Can u help me with find good version of firmware/calibration for it?

My actual TCM ID:
Module Name: TCM
Network: HS-CAN Protocol: GGDS

F108 ECU Network Signal Calibration Number No response
F111 ECU Core Assembly Number 8M5R-14F085-AD
F113 ECU Delivery Assembly Number
F124 ECU Calibration Data #1 Number DG9R-7J105-AE
F162 Software Download Specification Version 0x03
F163 Diagnostic Specification Version 0x02
F188 Vehicle Manufacturer ECU Software Number DG9R-7J104-AH
F191 Vehicle Manufacturer ECU Hardware Number 8M5R-14F085-AD
F18C ECU Serial Number 131106002017

Regards

[zygus2]

I have incompatibile software with this SW:

Module Name: TCM
Network: HS-CAN Protocol: GGDS

F108 ECU Network Signal Calibration Number No response
F111 ECU Core Assembly Number 8M5R-14F085-AD
F113 ECU Delivery Assembly Number AG91-7Z369-CD
F124 ECU Calibration Data #1 Number AG9R-7J105-PD
F162 Software Download Specification Version 0x03
F163 Diagnostic Specification Version 0x02
F188 Vehicle Manufacturer ECU Software Number AG9R-7J104-HB
F191 Vehicle Manufacturer ECU Hardware Number 8M5R-14F085-AD
F18C ECU Serial Number 130511035055

[fordsmaxtcdi]

you have previously saved the TCM configuration data

[zygus2]

No, oryginal TCM is missing for this car, i have only gearbox code from label AG9R 7000 GB

[kroligoff]

You need use VBF Loader flash correct SW:

SBL: 8G91-7J244-AD
1: AG9R-7J104-HB
2: AG9R-7J105-KD
3: AG91-14C389-BC

Use checkbox forced programming and input part: AG91-7Z369-BC

[zygus2]

Where can i find this kind of information? Is that based on VIN or what?