kroligoff писал(а):Hi,
1. Ok, Asbuilt is original on vehicle or modifed before? You read first and vehicle have parameter 150, before you modifications?
2. Now this vehicle set 163ps?
Hi Kroligoff,
First: i read all dtcs with forscan, and i have only error in the ipc module
Second: I make a backup with ucds and with elmconfig of the bcm.
Third: I read the configuration with the ucds software:
After, i change the engine type to 2.0 DW10C CR14 150PS Stage V, and write configuration.
After i go to Kuga2, to the label PCM Reprograming, and check CCC Laerning Diesel in PCM SPecial Procedures
To Finish i go to smax label, to dtcs, read all modules and reset all modules. And i make the same with forscan.
And then this error appear:
If i read the configuration the engine type is the last, 2.0 DW10C 150PS.
I change engine type to 136/140 but the error remains.
