UCDS Forum

Hello all,
anybody an idea, how to change the horsepower from 140 to 163 on Kuga MK1 in UCDSYS?
I have the cable and the UCDSYS Start Base Version.

This is what i´ve done yet: On the menu "2.0 TDCi Kuga" i have changed the engine type to 150 and write the configuration. Is this enough, or must i do some ohter steps?

If you changed in the 2.0 TDCI tab for 150hp, it seems to me that you still need to use CCC in spec proc. in the Mondeo MK4.
@kroligoff is this the right way?

So we enter Focus2 / Kuga -> PCM -> 2.0 tdci (DW10C) -> Read Configuration -> Change to 150/350.
Then Reset Kam Or in the tab Mondeo mk4 CCC learnig ???

Can anyone confirm?

Hello Guys

I have ucds and want to upgrade my fathers Ford Kuga Mk1 2011 from 140 HP to 163 HP. Can anyone share the right procedure how can I do this with ucds?

Thx in advance