I managed to make FORSCAN work and I did the APIM reconfiguration successfully, (i had a problem where forscan would give the error that the file was not loaded when in fact the file was loaded - it took me some time to realise that the file was actually loaded).
Now I have problems with the headlamp assemby (no automatic leveling and swiveling) I have an error regarding Communication vina LIN A and LIN B.
I got the ASBUILT from the Direct Config section, however when trying to write the 2 changes, writing fails (please see image attached). How can I write these changes?
And another problem with the automated parking module, where I receive an error that the configuration is incomplete. I looked in APIM and all settings related to the automated parking are active....
Initial Configuration not complete after FW Update
Модератор: DanMc85
-
- Сообщения: 23
- Зарегистрирован: 01 фев 2019, 01:44
Re: Initial Configuration not complete after FW Update
У вас нет необходимых прав для просмотра вложений в этом сообщении.
Ford Mondeo MK5 Titanium 2015 (210PS, Powershift) with too many options.
Belgium
Belgium
-
- Сообщения: 23
- Зарегистрирован: 01 фев 2019, 01:44
Re: Initial Configuration not complete after FW Update
I am coming back asking for help on two most stringent problems:
Headlamp control module and tailgate control module
UCDS does not read data in CONFIG Block DE08 - i can see in that section that the Power Liftgate Control Function is disabled - how can I make UCDS read from that section?
Module Name: RGTMNetwork: MS1 Protocol: GGDS
F10AECU Cal-Config Part Number
F110On-line Diagnostic Database Reference Number
F111ECU Core Assembly NumberDG9T-14F151-AC
F113ECU Delivery Assembly NumberDG9T-14B673-AZ
F162Software Download Specification Version0x05
F163Diagnostic Specification Version0x03
F188Vehicle Manufacturer ECU Software NumberDG9T-14C121-AZ
F18CECU Serial Number
Also the headlamp module has some weired issues saying that headlamps are not working but sometimes the error dissapears and the headlamps function, only to lose the functionality later on...
Module Name: HCMNetwork: HS1 Protocol: GGDS
F110On-line Diagnostic Database Reference NumberDSDG9T-13C148-BG
F111ECU Core Assembly NumberDG9T-14F110-BA
F113ECU Delivery Assembly NumberDG9T-13C148-BF
F162Software Download Specification VersionNo response
F163Diagnostic Specification Version0x03
F188Vehicle Manufacturer ECU Software NumberDG9T-14D063-BH
F18CECU Serial NumberNo response
Can I get some direction into fixing these issues?
Thanks
Headlamp control module and tailgate control module
UCDS does not read data in CONFIG Block DE08 - i can see in that section that the Power Liftgate Control Function is disabled - how can I make UCDS read from that section?
Module Name: RGTMNetwork: MS1 Protocol: GGDS
F10AECU Cal-Config Part Number
F110On-line Diagnostic Database Reference Number
F111ECU Core Assembly NumberDG9T-14F151-AC
F113ECU Delivery Assembly NumberDG9T-14B673-AZ
F162Software Download Specification Version0x05
F163Diagnostic Specification Version0x03
F188Vehicle Manufacturer ECU Software NumberDG9T-14C121-AZ
F18CECU Serial Number
Also the headlamp module has some weired issues saying that headlamps are not working but sometimes the error dissapears and the headlamps function, only to lose the functionality later on...
Module Name: HCMNetwork: HS1 Protocol: GGDS
F110On-line Diagnostic Database Reference NumberDSDG9T-13C148-BG
F111ECU Core Assembly NumberDG9T-14F110-BA
F113ECU Delivery Assembly NumberDG9T-13C148-BF
F162Software Download Specification VersionNo response
F163Diagnostic Specification Version0x03
F188Vehicle Manufacturer ECU Software NumberDG9T-14D063-BH
F18CECU Serial NumberNo response
Can I get some direction into fixing these issues?
Thanks
У вас нет необходимых прав для просмотра вложений в этом сообщении.
Ford Mondeo MK5 Titanium 2015 (210PS, Powershift) with too many options.
Belgium
Belgium
- kroligoff
- Сообщения: 1496
- Зарегистрирован: 16 янв 2013, 11:38
Re: Initial Configuration not complete after FW Update
If you upgrade Sync 3 on 3.4 (use usb), need reflash too use VBF loader on latest update. After DE08 can r/w
-
- Сообщения: 23
- Зарегистрирован: 01 фев 2019, 01:44
Re: Initial Configuration not complete after FW Update
I actually did the reflash to 3.4
What are the VBF files that I need to properly configure the APIM?
What are the VBF files that I need to properly configure the APIM?
Ford Mondeo MK5 Titanium 2015 (210PS, Powershift) with too many options.
Belgium
Belgium
- kroligoff
- Сообщения: 1496
- Зарегистрирован: 16 янв 2013, 11:38
-
- Сообщения: 23
- Зарегистрирован: 01 фев 2019, 01:44
Re: Initial Configuration not complete after FW Update
Configuring the APIM with the provided solution has indeed worked
North America:
3.4 APIM Navigation Unit Firmware
GB5T-14G376-AA
1U5T-14G374-EH*
1U5T-14G375-DA
GB5T-14G379-AA
5U5T-14G379-BB*
- The marked files above must be used together, otherwise Sync 3 may not boot.
- Typically after updating firmware, you need to re-write the entire original As-Built back to the unit to get rid of initial configuration errors.
After that I managed to get the asbuilt for the APIM and the majority of the settings came back without a problem. I still have some missing configurations DTC between APIM and IPC .. but the functionality is in no way compromised.
THe Headlight module and Parking module relearned started to work properly after I left the battery disconnected for one night.
North America:
3.4 APIM Navigation Unit Firmware
GB5T-14G376-AA
1U5T-14G374-EH*
1U5T-14G375-DA
GB5T-14G379-AA
5U5T-14G379-BB*
- The marked files above must be used together, otherwise Sync 3 may not boot.
- Typically after updating firmware, you need to re-write the entire original As-Built back to the unit to get rid of initial configuration errors.
After that I managed to get the asbuilt for the APIM and the majority of the settings came back without a problem. I still have some missing configurations DTC between APIM and IPC .. but the functionality is in no way compromised.
THe Headlight module and Parking module relearned started to work properly after I left the battery disconnected for one night.
Ford Mondeo MK5 Titanium 2015 (210PS, Powershift) with too many options.
Belgium
Belgium
-
- Сообщения: 1
- Зарегистрирован: 20 окт 2020, 22:07
Re: Initial Configuration not complete after FW Update
Hi, i am experiencing the same error, no answer on SEED request.
Module Name: CCM
F111 - ECU Core Assembly Number : BA1T-14F089-AB
F113 - ECU Delivery Assembly Number : AG9N-9G768-BF
F120 - ECU Software #2 Part Number : AE9T-14D049-BC
F162 - Software Download Specification Version :
F163 - Diagnostic Specification Version : 0x03
F188 - Vehicle Manufacturer ECU Software Number : BA1T-14D049-AA
F18C - ECU Serial Number : 1213120700140
can you share on how to fix this?