UCDS Forum

Hello,

My name is Ramon, i Am waiting for buy ucds cable. I have some friends with engine dw10c.

I would like know if there is any Tutorial or guide for make the changes, step by step, for upgrade the engine from 140 Cv to 163 Cv, i Think that i need the ucds cable, it is correct? Is there anyone some video or pictures for make it?

Thanks.

Best regards!

I found this information in the wiki UCDS but for Kuga2!

Применимо для: Куга2, AWD, PS, Дизель

Читаем конфигурацию.
Выбираем во вкладке «Тип двигателя» Дизель 163.
Записываем конфигурацию в машину.
В «Спец. процедуры» делаем инициализацию ABS.
В «Программирование PCM», кликаем на «Изучить подстройки CCCDisel»
В «DTС» стираем ошибки.
Пуск двигателя, можно даже и прокатиться.
Считываем ошибки и стираем их.

For Smax is the same procedure???

Thanks

In UCDS software does not have procedures for Mondeo/Galaxy/S-Max TDCI 140->163

Speedo писал(а):In UCDS software does not have procedures for Mondeo/Galaxy/S-Max TDCI 140->163

I have elmconfig cable with HS/MS canbus switch.
I have elmconfig, forscan, etc.

Then, what i need for make it?

Thanks Speedo!

phoenix241 писал(а):

Speedo писал(а):In UCDS software does not have procedures for Mondeo/Galaxy/S-Max TDCI 140->163

I have elmconfig cable with HS/MS canbus switch.
I have elmconfig, forscan, etc.

Then, what i need for make it?

You need now IDS

ELM + ELMconfig + IDS =140->163

Thanks leszcz33!

I have the elm327 cable from tunnel rate electronics (uk), with switch for HS/MS.

Then i need other cable? or with elmdff2 is enough? if i need other cable do you can, please, tell me one link for buy it?

Thanks!

http://www.ebay.com/itm/OEM-Ford-Rotund ... 1675211090


or someone who has it already

Richard, very nice cable!

I guess there will be some other cheaper option, no?

Thanks!

Why do we need IDS?
Should theoretically approach procedure from the Kuga.

If no in new version cooming soon add services procedures in direct config

Speedo писал(а):In UCDS software does not have procedures for Mondeo/Galaxy/S-Max TDCI 140->163

kroligoff писал(а):Why do we need IDS?
Should theoretically approach procedure from the Kuga.

If no in new version cooming soon add services procedures in direct config

for Mondeo/Galaxy/S-Max

You need Buttons on Section Mondeo?

kroligoff писал(а):You need Buttons on Section Mondeo?

Yes Yes Yes
to change from 140KM to 163KM

and it will be all?

For me unfortunately it did not work out to update to 163PS, although using UCDS and IDS. Just had a heavy nailing sound from the engine and Ford needed to set back the pcm values.