Update Convers+ (old version)

Big car family

Модератор: DanMc85

jare_1989
Сообщения: 6
Зарегистрирован: 26 дек 2017, 12:24

Re: Update Convers+ (old version)

Сообщение jare_1989 »

I wanted to try again but seems like bad programming used the 2nd level token. It was there straight after the failed programming but when I restart the software to try again there is no level2 tokens any more. Does anyone know how can I get my token back so I can try again?

Artist
Сообщения: 121
Зарегистрирован: 04 ноя 2017, 08:10

Re: Update Convers+ (old version)

Сообщение Artist »

The VIN used should be stored in the database, now you can check the check box next time you try the same car ...


Изображение

jare_1989
Сообщения: 6
Зарегистрирован: 26 дек 2017, 12:24

Re: Update Convers+ (old version)

Сообщение jare_1989 »

The box is not ticked in my case.

jare_1989
Сообщения: 6
Зарегистрирован: 26 дек 2017, 12:24

Re: Update Convers+ (old version)

Сообщение jare_1989 »

Support mail me saying the will be updated version soon with this bug fix but I still waiting for answer what should I do to get my token back. They are taking time and replaying after a week or two!!!! Joke

Smaxe
Сообщения: 2
Зарегистрирован: 15 июл 2018, 21:17

Re: Update Convers+ (old version)

Сообщение Smaxe »

Hello, Have just updated with ucds my Converst on 1007 version, 1122 not possible because Pre FL (problem with pointers tachometer and temperature)
How is it still possible to get the Convers Mod only Parkassistant?
Set Motral Base hook and select 1122? or do I get the pointer problem again?
Thanks
Great Software, Keep it Up

zaqik
Сообщения: 340
Зарегистрирован: 30 янв 2013, 01:44
Откуда: Czech Republic

Re: Update Convers+ (old version)

Сообщение zaqik »

select 1122 from motral with parkassistant ... UCDS make main+extended flash and all will be OK

FoMo4
Сообщения: 11
Зарегистрирован: 10 апр 2019, 08:58

Re: Update Convers+ (old version)

Сообщение FoMo4 »

Hello,

I have Mondeo mk4 2007 with convers NVM target ROM 0802.

Can i go directly to 1122 from Motral or i need to flash 1007 first?

janel
Сообщения: 47
Зарегистрирован: 02 авг 2015, 16:30

Re: Update Convers+ (old version)

Сообщение janel »

go straight ahead

FoMo4
Сообщения: 11
Зарегистрирован: 10 апр 2019, 08:58

Re: Update Convers+ (old version)

Сообщение FoMo4 »

Thanks!

FoMo4
Сообщения: 11
Зарегистрирован: 10 апр 2019, 08:58

Re: Update Convers+ (old version)

Сообщение FoMo4 »

Hello,

After update to 1122, "Key not detected" appear on screen. Car was able to start and drive but message stays on screen. After updating the RFA module, START button stop working, key fob was unable to lock/unlock car (same with the second key fob). It's impossible to program key fob even from a dealer (he told me to change central locking control module).

So .... what is connection between convers and central locking control module?

janel
Сообщения: 47
Зарегистрирован: 02 авг 2015, 16:30

Re: Update Convers+ (old version)

Сообщение janel »

No connection. The IPC is not involved at all in the starting process.
After the update on the IPC you should check for errors and delete them, some U errors may appear during programming. That could be a reason for the "Key not detected error" you had.
Updating the RFA is very risky indeed, as highlighted by the Update Wizard too. I would strongly recommend you no to do it (albeit a bit late).

teckfine
Сообщения: 3
Зарегистрирован: 25 янв 2020, 18:00

Re: Update Convers+ (old version)

Сообщение teckfine »

for old convers+:
if
firmware of convers+ is smaller than 1007, you can update on 1007 (in two steps: 1. main flash, 2. extended flash)
if firmware of convers+ is bigger than 1007, you can update on 1121 (in two steps: 1. main flash, 2. extended flash)

Аватара пользователя
souto81
Сообщения: 2
Зарегистрирован: 10 янв 2021, 20:13
Откуда: CADIZ- ESPAÑA

Re: Update Convers+ (old version)

Сообщение souto81 »

teckfine писал(а): 25 янв 2020, 18:02 for old convers+:
if
firmware of convers+ is smaller than 1007, you can update on 1007 (in two steps: 1. main flash, 2. extended flash)
if firmware of convers+ is bigger than 1007, you can update on 1121 (in two steps: 1. main flash, 2. extended flash)
Thanks

Ответить