IPC Ford Fusion dead after update (RESOLVED)

New Ford cosmic car

Модератор: DanMc85

schytryk
Сообщения: 9
Зарегистрирован: 26 ноя 2016, 13:24
Откуда: Poland

IPC Ford Fusion dead after update (RESOLVED)

Сообщение schytryk »

Hi,

I updated Ford Fusion USA 2015 IPC module by update wizard by new version UCDS 2.0.001.008, ater update IPC is dead.
Part number IPC FS7T-10849-JF

IDS 103 say "No new calibration files for your IPC"

Please help to restore by UCDS or IDS, if is possible in IDS force reprograming in the same version?

Regards
Sebastian

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: IPC Ford Fusion dead after update

Сообщение DanMc85 »

That's is quite the coincidence... I have a 2015 Fusion IPC that I use for testing... FS7T-10849-JF. I was trying to update it to the new JG revision. It flashed perfectly fine, but will no longer turn on.
Bootloader still responds, so I can still reflash the firmware, but it doesn't do me any good if it doesn't turn on after the fact.

I tried doing a Module Reprogramming with IDS 104.01, but similar: Said no update available yet.

I even tried manually sending the boot/power on CAN commands with an OBDLink MX adapter to power it up, with no luck. (The commands worked before trying to flash it)

ATZ
ATSP6
ATCAF0
ATSH 3B3
40 88 00 12 10 ... (Sent repeatedly a few times)



I already PMed @kroligoff about the issue,

My friend Jesse has a 2013 (DS7T)/2014 (FS7T) Fusion/Mondeo (Hybrid) IPC that has the same issue as well. So far this is 3 known cases of a bad IPC update flash procedure, not limited to just the 2015 (FS7T) models.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: IPC Ford Fusion dead after update

Сообщение dragunov »

I guess better use those vbf loader, no?
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: IPC Ford Fusion dead after update

Сообщение DanMc85 »

dragunov писал(а):I guess better use those vbf loader, no?
Makes no difference... something isn't being flashed correctly or missing commands.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: IPC Ford Fusion dead after update

Сообщение dragunov »

Well, vbf loader uses the files u manually upload to it, Update Wizard uses files found online (possible from another type of Ford)

But indeed, there is an error in the update routine in the latest version of UCDS it seems
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

schytryk
Сообщения: 9
Зарегистрирован: 26 ноя 2016, 13:24
Откуда: Poland

Re: IPC Ford Fusion dead after update

Сообщение schytryk »

Vbf loader I used to.
Files:
FS7T-14C025-JB
FS7T-14C026-GG
FS7T-14C088-GE and GF

Flashing finished fine but IPC still not working.

Maybe I need use other files for this IPC?

Regard
Sebastian

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: IPC Ford Fusion dead after update

Сообщение dragunov »

I guess u mixed up the files
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: IPC Ford Fusion dead after update

Сообщение DanMc85 »

It's an issue the way UCDS is flashing the unit. Nothing to do with the files.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: IPC Ford Fusion dead after update

Сообщение dragunov »

Nothing received yet?
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

schytryk
Сообщения: 9
Зарегистрирован: 26 ноя 2016, 13:24
Откуда: Poland

Re: IPC Ford Fusion dead after update

Сообщение schytryk »

Hello Friends,

Any good news?

schytryk
Сообщения: 9
Зарегистрирован: 26 ноя 2016, 13:24
Откуда: Poland

Re: IPC Ford Fusion dead after update

Сообщение schytryk »

Friends

I was able to upload the original firmware by IDS
But ... I do not know exactly how :)
I did so.
I started the IDS without access to the Internet
I chose reprograming IPC
I gave VIN another car with a 2015 years but the older module FC
I chose service function 24041
IDS asked asbuild and files copied to the directory
He wrote that the module version is different than the one that results from VIN and if I want to change
I answered yes and started programming
and now works :)

I am not sure or for example entering the code 24041 has helped or not does not matter
For sure helped run without internet
I look forward to to improve the action UCDS because I want to upload the soft European hybrids

Regards
Sebastian

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: IPC Ford Fusion dead after update

Сообщение DanMc85 »

Not a bad idea. I forgot about trying those special IDS codes. I have an entire list of them.

00008 - IDENT_APPLY_PATCHES_VIA_FLOPPY
00009 - IDENT_UPDATE_PTU_FROM_FLOPPY
32287 - IDENT_LAUNCH_APP_MCP_REST
60503 - IDENT_LAUNCH_REGRESSION_RECORDER
27001 - IDENT_LAUNCH_FT_EOL_CP_MZ_01
32247 - IDENT_LAUNCH_SERVICE_ROUT
24040 - IDENT_ENABLE_VALIDATION_MODE
24041 - IDENT_DISABLE_VALIDATION_MODE
23761 - IDENT_LAUNCH_APP_FT_DATA_REC
81105 - IDENT_LAUNCH_APP_TSBSSMLIST
53061 - IDENT_IGNORE_MCP_INHALE - ASK FOR As-Built Data
26503 - IDENT_LAUNCH_APP_VVAG
81104 - IDENT_LAUNCH_APP_FTW_SHIP_MODE_01
29124 - IDENT_TOGGLE_FORD_EXTRANET_INTRANET_URLS
60274 - IDENT_LAUNCH_CCC_ENGINEERING_APP
32227 - IDENT_LAUNCH_PROPSHAFT_BAL_APP
48712 - IDENT_LAUNCH_GENERIC_RCM_CONFIG_APP
28487 - IDENT_LAUNCH_FT_ICCMSP_MZ_01_APP
28097 - IDENT_TOGGLE_BATTERY_MONITORING
70263 - IDENT_LAUNCH_GENERIC_DIAG
71863 - IDENT_MCP1
63296 - IDENT_LAUNCH_FTW_RKE_MODE_01_APP
08080 - IDENT_LAUNCH_DETAILED_NETWORK_DIAG
32267 - IDENT_LAUNCH_APP_ENG_SUPPORT_TOOL

schytryk
Сообщения: 9
Зарегистрирован: 26 ноя 2016, 13:24
Откуда: Poland

Re: IPC Ford Fusion dead after update

Сообщение schytryk »

have you more detailed about these codes?

Аватара пользователя
Darkleo
Сообщения: 458
Зарегистрирован: 18 янв 2013, 00:45
Откуда: Санкт-Петербург

Re: IPC Ford Fusion dead after update

Сообщение Darkleo »

Hi guys
We are found where is problem.
Never before Ford is not use VBF files where data is in COMPRESSED format (or we never see)
So this option is never parsing from VBF and never use by our software
Now we make updates in code and next version will no be have any problems with programming IPC or some else modules where data incoming in compressed format

Greets

Аватара пользователя
Darkleo
Сообщения: 458
Зарегистрирован: 18 янв 2013, 00:45
Откуда: Санкт-Петербург

Re: IPC Ford Fusion dead after update

Сообщение Darkleo »

Thanks for your help with logs from IDS

Ответить