UCDS Forum

Is it possible to add climate control via the sync3 touchscreen as its not available on uk sync

Thank you in advance

Yes, you can do it.
See:
https://wiki.ucdsys.ru/doku.php?id=dc_sync3:start

kroligoff писал(а):Yes, you can do it.
See:
https://wiki.ucdsys.ru/doku.php?id=dc_sync3:start

Thank you i got it working

Terry

Hi

Need some help as it looks like the climate is set for a LHD as when i alter the right side it alters the left hand side on the display , can anything be done to change it so it works correctly

As you can See on the pic attached the temp is opposite to the climate control panel itself

Thank you

STtel писал(а):Hi

Need some help as it looks like the climate is set for a LHD as when i alter the right side it alters the left hand side on the display , can anything be done to change it so it works correctly

As you can See on the pic attached the temp is opposite to the climate control panel itself

climate1.jpg

Thank you

Yes in UCDS... Direct Config... Sync 3... DE00... On the middle of the page of options. VEHICLE DRIVER LOCATION. You can change it there.

Thanks Dan much appreciated