Change IPC Firmware Lincoln MKZ to Mondeo MK5/Fusion

Resolving problems with software and hardware

Модератор: DanMc85

Ответить
Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

as2222us писал(а):Flashed today the GS7T-14C026-AJD firmware and the trip computer shows the 4 quadrants...
IMG_20161209_175035.jpg
Must be a Europe only option... Plus yours is in KM and such.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение dragunov »

FS7T-14C026-AJG is the latest version
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

dragunov писал(а):FS7T-14C026-AJG is the latest version
No it's not. Well technically it is for 2015... The one we both flashed is the newest. The GS7T-AJD. Notice the G in front not an F. . F=2015MY G=2016MY. Soon there will be an H. Probably starting with AJA/AJB.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение dragunov »

Indeed!

Didn't have a look to the first letter, so this one works on the Euro versions of the digital IPC?
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

dragunov писал(а):Indeed!

Didn't have a look to the first letter, so this one works on the Euro versions of the digital IPC?
Yep. It will work in the F series just not the D series.

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

20161211_182155_Burst03.jpg
I like the persistent speed limit sign while driving... here in USA we don't have traffic sign detection so it pulls it from the Navigation on the APIM when the street has a known speed limit.
У вас нет необходимых прав для просмотра вложений в этом сообщении.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение dragunov »

My calibration file: FS7T-10849-ALB
Software number: FS7T-14C026-AJB

So I'm able to update it to the latest G version?

Yes?

Thanks!
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

dragunov писал(а):My calibration file: FS7T-10849-ALB
Software number: FS7T-14C026-AJB

So I'm able to update it to the latest G version?

Yes?

Thanks!
Yes if you want to, it should work fine.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение dragunov »

I wonder why Ford doesn't find an update for the IPC when they connect the car to their FDRS system...
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

dragunov писал(а):I wonder why Ford doesn't find an update for the IPC when they connect the car to their FDRS system...
Ford won't officially let you flash another Model Years update, in this case the firmware is for 2016 but the 2015 hardware is physically the same.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение dragunov »

I don't even get the latest F software for my car
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

jmr061
Сообщения: 10
Зарегистрирован: 12 ноя 2016, 23:28

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение jmr061 »

What does it mean when it says keys not found during an attempted IPC firmware upgrade?

I am attempting to update firmware on a NA 2017 Explorer high level IPC to EU 2016 Edge IPC.

After saying keys not found it attempts a forced programming but fails.

Thanks

as2222us
Сообщения: 27
Зарегистрирован: 26 мар 2016, 00:35

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение as2222us »

What hardware number is reported by the vbf loader?
What firmware set is used on the Explorer and what set would you like to flash?

The key issue means that the hardware number read from your cluster is not the expected one from your car selection. For example: I tried to flash a Lincoln MKZ cluster while selecting Mondeo 2015 as the car type => key error. When selecting Fusion 2013 (as the MKZ cluster wasfrom 2013) it worked.

Аватара пользователя
DanMc85
Сообщения: 104
Зарегистрирован: 06 май 2016, 04:24
Откуда: USA
Контактная информация:

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение DanMc85 »

as2222us писал(а):What hardware number is reported by the vbf loader?
What firmware set is used on the Explorer and what set would you like to flash?

The key issue means that the hardware number read from your cluster is not the expected one from your car selection. For example: I tried to flash a Lincoln MKZ cluster while selecting Mondeo 2015 as the car type => key error. When selecting Fusion 2013 (as the MKZ cluster was from 2013) it worked.
I was trying to help him with this the other day and we didn't have much luck. He actually has 2 of these clusters... one from a 2017 Ford Explorer Platinum and one from a 2016 Lincoln MKC SUV.
The explorer part number is: HB5T-10849-EA
The MKC part number is: FJ7T-10849-CD

Trying to flash them to: GM2T-10849-APG



Existing MKC Cluster Fileset:

Bootloader: EJ7T-14C025-AA
VMES: FJ7T-14C026-CE
VMES #2: FJ7T-14C026-DD
ECD: FJ7T-14C088-CD
ECD #2: FJ7T-14C088-DD

<m module="IPC">
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-DS7T-1A292-CJB"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="EJ7T-14F094-BA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="FJ7T-10849-CD"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="FJ7T-14C088-CD"/>
<d DID="F162" Desc="Software Download Specification Version" Data=""/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="FJ7T-14C026-CE"/>
</m>



Existing Explorer Fileset:

Bootloader: EJ7T-14C025-AA
VMES: HB5T-14C026-EA
VMES #2: HB5T-14C026-FA
ECD: HB5T-14C088-EA
ECD #2: HB5T-14C088-FA



<m module="IPC">
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-EM2T-1A292-JAB"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="DS7T-14F094-AJA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="HB5T-10849-EA"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="HB5T-14C088-EA"/>
<d DID="F162" Desc="Software Download Specification Version" Data=""/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="HB5T-14C026-EA"/>
</m>


He is trying to convert either of these to the EU Edge: (ironically the IPC Part Number is listed under 2016 USA Edge and not EU):


New Edge Fileset to Flash:

Bootloader: EJ7T-14C025-AA
VMES: GM2T-14C026-NE
VMES #2: GM2T-14C026-ANE
ECD: GM2T-14C088-NE
ECD #2: GM2T-14C088-ANE


<m module="IPC">
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-EM2T-1A292-JAC"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="DS7T-14F094-AJA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="GM2T-10849-APG"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="GM2T-14C088-NE"/>
<d DID="F162" Desc="Software Download Specification Version" Data=""/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="GM2T-14C026-NE"/>
</m>

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Change IPC Firmware MKZ to Mondeo 5

Сообщение dragunov »

So, u gave the firmware version, but what other files do we need, we need 5 files to update the IPC...

bootloader, 2 firmwares en 2 calibration files, correct?
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Ответить